Sampling Valves - Series VARINLINE®

The valve is used for drawing product samples in larger amounts. The valve disk closes the product pipe from the outside (type N).

Sample drawing may be automatical or manual via a one-port or two-port process connection. Optionally, the valve stem sealing may be reinforced by a metal bellows. Position feedback is available on request.

Standard design:

• Materials
  Housing 1.4404/AISI 316L
  Product contact parts 1.4404/AISI 316L
  Other parts 1.4301/AISI 304
  Seals EPDM
• Surface finish outside matt,
  inside Ra<1.2 µm
• Standard actuator for
  control air pressure min. 6 bar
  product pressure max. 10 bar
  with stainless steel bellows max. 5 bar