GEA Tuchenhagen
Access Unit VARINLINE®
The core piece of the in-line control and measurement technology is the process connection fitting, the "In-Line Access Unit". It is mainly a two-port straight-through housing with two lateral fittings for the connection of instruments. An exception are the nominal widths DN 10 / 15 and ISO 17.2 / 21.3. Depending on the nominal width of the In-Line Access Unit and the installation depth of the instruments, it is possible to incorporate two intruments maximum.
Description:
- for pocket-free installation of VARINLINE® measuring and control instruments into pipe systems
- clear height of the in-line access unit corresponds to the inside diameter of the connecting pipe
- VARINLINE® access units may directly be welded into pipe systems or fitted with commercial connection fittings.
- for the connection of two different VARINLINE® measuring and
- control devices at one VARINLINE® access unit
- process connections without transmitter can be sealed with
- suitable blanking plates